HipoEngineering.COM

Motive Bleeder Quick Connect Adapter

Motive Bleeder produces an outstanding brake fluid pressure bleeder that includes a universal black plastic adapter as shown in right photo above. The adapter replaces the brake cap while a chain routes under the reservoir and is connected to the hooks. As you tighten the wing nuts, the unit secures to the reservoir to form a seal.

I had difficulties obtaining a secure seal on my Viper and could hear air leaks at higher pressure. Brake fluid will destroy paint and I envisioned the seal coming loose and spraying fluid all over the engine. The Dodge Viper factory service manual recommends the use of a Miller Tools Special tool (Non-ABS Vipers 92-00 tool shown in right
photo) for pressurized brake bleeding and I purchased it. The unit consists of a machined aluminum adapter that replaces the brake cap and forms an airtight seal. The unit comes with a brass male threaded fitting and it is your task to find the right parts to connect it to the Motive Bleeder.

I desired the best of both worlds. I wanted to connect the Miller Tools adapter but also maintain the use of the Motive Bleeder universal adapter for other vehicles. A quick-connect fitting was the solution but obtaining the correct parts and sizes was difficult. I also wanted a 90 degree bend on the end of the tube to make it more convenient to use the tool.

HiPo Engineering has taken all the hassles out of researching these parts and produced an inexpensive kit with everything included.

- 2 non-valved nipples - 1 non-valved coupler - 2 hose barb - 1 street elbow - 2 hose clamps
*Kit does not include Miller Tools aluminum special tool in photos above.

Craig Vanderver
HiPo Engineering
Director of Sales and Marketing
VCA Member #15308
VCA Website Name 95Viper